English

Ihe ngwọta ngwaọrụ ahụike

Ngwa ịwa ahụ ise axis laser ọnwụ igwe YC-TLM500 Featured Image
  • Ngwa ịwa ahụ ise axis laser ọnwụ igwe YC-TLM500

Ngwa ịwa ahụ ise axis laser ọnwụ igwe YC-TLM500

Nkọwa dị mkpirikpi:

Ngwá ọrụ ịwa ahụ laser ọnwụ igwe YC-TLM500 bụ nke a na-eji maka micromachining laser nke endoscope siri ike, endoscope, stapler, stapler, mma ultrasonic, adụ ahụ dị nro, planer, agịga puncture, imi imi na ihe ndị ọzọ ịwa ahụ na orthopedic.


  • Obere mbepụ obosara:18 ~ 30 nkeji
  • Izi ezi igwe dị elu:≤±10um
  • Ogo mbepụ dị mma:Enweghị akụkụ siri ike, mbepụ dị larịị
  • Ịrụ ọrụ nhazi dị elu:otu oge na-egbutu mgbidi n'akụkụ, nhazi nri na-aga n'ihu na-akpaghị aka

    • Nkọwa ngwaahịa

    Nka na ụzụParameters:

    Ọsọ ịrụ ọrụ kacha 500mm / s (X1); 500mm / s (Y1 / Y2); 50mm / s (Z);
    Ndokwa nke ziri ezi ± 3um (X1) ± 3um (Y1/Y2) ± 5um (Z) ;
    Izizi ntọghata ugboro ugboro ± 1um (X1) ± 1um (Y1/Y2) ± 3um (Z)
    Ihe eji eme ihe 304&316L&Ni-Ti&L605&Al&Gu&Li&Mg&Fe wdg.
    Oke nhazi ụgbọ elu 450mm*600mm;
    Ụdị laser Fiber laser;
    Ogologo ogologo nke laser 1030-1070± 10nm;
    ike laser 200W&250W&300W&500W&1000W&QCW150W maka nhọrọ;
    Ngwa ọkụ ọkụ 220V± 10%, 50Hz;AC 25A (isi sekit breaker);
    Ụdị faịlụ DXF&DWG&STP&IGS;
    Akụkụ akụrụngwa 1280mmx1320mmx1600mm;
    Ibu akụrụngwa 1500kg;
    TLM500

    TLM500

    Ike mgbanwe
    ① Na laser akọrọ ọnwụ & mgbochi mmiri ịcha & mkpọpu & slotting na ndị ọzọ mma machining ike.
    ②Centripetal & vetikal & compound oghere atụmatụ machining maka akwado hà dayameta tube & variable dayameta tube & ụgbọ elu ngwá.
    ③ Nwere ike hazie 304&316l&Ni-Ti&L605&Al&Gu&Li&Mg&Fe na ihe ndị ọzọ.
    ④ Dakọtara na nkenke D-ụdị chuck & ER series Chuck & three-jaw Chuck na ndị ọzọ nkenke mkpa-walled tube clamping usoro.
    ⑤Nabata usoro nkwado aka akpa akpa akpa nwere njiri mara nkenke yana mgbanwe nnabata nke onwe ya.
    ⑥ Nye ndị kenha atụmatụ nke ziri ezi mkpa-walled tube na-aga n'ihu akpaka ndepụta nhazi & akpaka loading na ebutu.
    ⑦ Kwadoro na 2D & 2.5D & 3D CAM software usoro maka micromachining laser.
    Oke ngwa:
    Laser micromachining nke ịwa ahụ na orthopedic ngwá dị ka isiike endoscope & ultrasonic scalpel & endoscope& stapler & suture ngwaọrụ & soft drill & planer & puncture agịga & imi imi.
    Machining dị oke mma:
    ① Obere mbepụ onuete obosara: 18 ~ 30um
    ②Izi ezi igwe dị elu: ≤ ± 10um
    ③ Ezi mma nke mbepụ: ọ dịghị burr & ezigbo mbepụ
    ④ High machining arụmọrụ: otu-apụ ịcha site n'otu akụkụ tube mgbidi & na-aga n'ihu akpaka ndepụta machining

    KOKO-2

    Nhazi na-agbanwe agbanwe
    ① Soro echiche imewe nke ergonomics, siri ike na nkenke
    ② Na-enye ọrụ nhọrọ nke igwe ọhụụ usoro iji nyochaa oge n'ịntanetị na-enyocha usoro nhazi laser ike.
    ③ Ọrụ ngwanrọ na ngwaike dabara n'ụzọ na-agbanwe agbanwe, na-akwado nhazi ọrụ ahaziri iche & njikwa mmepụta ọgụgụ isi
    ④ Kwado imewe ihe ọhụrụ site n'ọkwa akụrụngwa ruo n'ọkwa sistemụ
    ⑤ Mepee ụdị njikwa & laser micromachining software usoro dị mfe iji rụọ ọrụ & kensinammuo interface

  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Akụkọ metụtara ya

    Pịa tinye ka ịchọọ ma ọ bụ ESC mechie